Does Michaels Sell Mat Board Cutters for Home Framing
Finding the right tool for custom framing often depends on the volume of work you intend to produce. While big-box craft stores provide quick access to manual tools for hobbyists, their inventory is intentionally limited to portable, low-cost options. Serious framers eventually move toward specialized equipment that offers greater stability and precision than the handheld models found in the aisles of a local hobby shop.
Quick facts
| Feature | Handheld Cutter | Professional System |
|---|---|---|
| Price Range | $20 - $50 | $300 - $1,500+ |
| Best For | Occasional use | High-volume framing |
| Accuracy | Manual skill-based | Mechanical guidance |
What types of mat board cutters are available for purchase at craft supply retailers?
Retailers typically offer a limited selection of manual tools designed for hobbyists who need to trim or bevel mat board for small-scale framing projects.
- Handheld bevel cutters utilize a sliding mechanism that holds a blade at a fixed 45-degree angle for creating decorative window openings.
- Straight-edge guides provide a rigid metal track to keep the blade steady and prevent the tool from drifting during long cuts.
- Replacement blade packs are necessary because mat board dulls steel edges quickly, often requiring a fresh edge every 2-3 cuts for a clean finish.
- Self-healing mats protect your work surface from deep gouges while providing a grippy texture that prevents the board from sliding.
How do professional-grade mat cutters differ from handheld versions sold in stores?
Professional systems often feature integrated measuring stops and squaring arms, which allow for repeatable cuts within 0.005 inches of accuracy. Unlike handheld tools, these machines use heavy-duty rails that keep the blade perpendicular to the board, preventing the common issue of wavy or overcut corners found in manual work.
What essential accessories are required to operate a manual mat board cutter effectively?
Operating a manual cutter effectively requires a few specific tools to manage the board and achieve clean, professional-looking bevels on your mats.
- Non-slip clamps hold the mat board and the guide rail firmly against the table to stop shifting, which is the primary cause of ruined boards.
- Metal straight-edges should be at least 30 inches long to accommodate standard mat sizes and provide a solid surface for the cutter to ride along.
- Utility knives with snap-off blades are useful for trimming the outer edges of the board before you move to the precision bevel cuts.
- Drafting squares help you verify that your corners are exactly 90 degrees before you start cutting, preventing skewed frame openings.
Are there specific brands of framing tools typically stocked by major arts and crafts chains?
Yes, major chains frequently stock Logan Graphics products, which dominate the retail market for consumer-level framing tools. You’ll find their basic series, such as the Logan 2000 or 3000 models, which are designed specifically for occasional home use rather than the high-volume production seen in professional frame shops.
What safety precautions should be followed when using a blade-based mat cutter?
Always keep your fingers well behind the path of the blade, as even a dull-looking utility blade can cause deep lacerations if it slips during a cut. Use a firm, downward pressure on the guide rail to prevent the tool from jumping, and keep the area clear of loose scraps that might cause you to lose your footing or balance. For example, wearing cut-resistant gloves is a smart practice when changing out dull blades, as this is when most accidental cuts occur.
One nuance to remember is that you shouldn't force the blade through the board in a single pass. Making two or three light, controlled passes is safer than trying to power through the entire thickness at once, which increases the risk of the blade binding or snapping under pressure.
How does the price range of entry-level mat cutters compare to advanced framing equipment?
Entry-level cutters are significantly cheaper than professional equipment, though they lack the mechanical precision required for high-volume, repetitive framing tasks.
| Equipment Type | Typical Cost | Precision Level |
|---|---|---|
| Handheld Beveler | $25 | Low |
| Tabletop Rail System | $150 | Medium |
| Wall-Mounted Cutter | $800 | High |
| Professional Production | $1,500+ | Industrial |
Use these price points to determine if your project volume justifies the higher investment in a system that offers better repeatability.
Can store associates provide guidance on selecting the appropriate cutter for custom picture framing projects?
Store associates can help you locate where these tools are stocked, but they rarely possess the specialized training required to provide technical advice on mat cutting techniques. A lot of people assume that store staff are trained framers who can teach you how to cut complex double mats, but in reality, they are usually retail workers with little to no experience in professional mounting or archival framing methods. If you need specific advice on blade angles or board types, look for tutorials from the manufacturer instead.
What are the primary differences between wall-mounted and tabletop mat cutting systems?
Wall-mounted systems are designed for high-volume shops where floor space is limited and the operator needs to cut large sheets of mat board quickly. These units use a vertical rail that allows the blade to be pulled downward by gravity, which provides a consistent, smooth stroke that is difficult to replicate on a flat surface. For instance, a wall-mounted cutter makes it easy to handle a 32-by-40-inch sheet without needing an oversized table.
Tabletop systems, by contrast, are better suited for home studios where you can work on a smaller scale. While they are more compact, they require significantly more manual effort to keep the board square and the blade travel straight. One exception is the high-end tabletop model, which includes a squaring arm that mimics the accuracy of a wall-mounted unit, though it still occupies a large footprint.
Mistakes to avoid
- Buying the cheapest blade. Low-quality blades tear the mat board surface; always use fresh, sharp blades to keep edges clean.
- Skipping a non-slip base. Cutting without a dedicated non-slip mat or clamp results in crooked lines; anchor your work securely before starting.
- Ignoring blade depth. Setting the blade too deep damages the underlying table; adjust your depth to cut only through the board thickness.
Choosing the Right Cutting Tool
Assess your project frequency before investing in expensive framing machinery. If you only plan to cut a few mats each year, the basic tools available at craft retailers will likely suffice for your needs.